Skip to product information
1 of 8

INTROVERT

54mm-42mm Stepdown Basket For Breville / Sage Machines

54mm-42mm Stepdown Basket For Breville / Sage Machines

Regular price £87.00 GBP
Regular price Sale price £87.00 GBP
Sale Sold out
Taxes included. Shipping calculated at checkout.
Bundle

Out of stock

A 54-42mm stepdown basket custom-made just for Breville / Sage machines. CNC Milled from solid 304 stainless steel. Shots from this are extra sweet and bright, with a reduction of bitterness and, in some cases, body.

Capacity is between 16-18g, depending on your roast level and grind size.

Will be released November 27th, 2026, along with an optional custom stepdown aluminum dosing ring, and optional custom self-levelling tamper.

Photos of the prototype shown: basket design may be subject to change for release.

 

Why Stepdown from 54mm?

A stepdown espresso basket fits a standard 54mm portafilter but has a smaller extraction chamber, 42mm for this instance. Given the same dosage size, this results in a thicker espresso puck and promotes more balanced shots, more even extraction, more even flow, and ideally more pronounced flavours with less harshness as a result. By having a taller aspect ratio espresso puck, you rely more on the thickness of the coffee puck to provide its own resistance rather than choking it with a finer grind on a thinner puck. With the coarser grind afforded by the thicker puck, you decrease the chances of channeling, dry spots, and uneven extraction that usually results in harshness, astringency, and bitterness. Overall, it brings the forgiving, high-aspect-ratio performance of 42mm baskets to your 54mm machine, and makes low-dose and precision shots easier and more consistent.

Key Features

CNC-machined From a Solid Block of 304 Stainless Steel
Unlike almost all of the baskets out on the market, which are are stamped, this basket is CNC-machined from solid steel. This yields maximum precision, perfectly straight walls, much sharper and precise edges. The thickened base means it has little to no visible flex during the shot, up to 9 bars of pressure. Flexing during the shot will negatively affect consistency because the shape of the puck is actively changing and may focus the flow towards the center and, in the worst-case scenario, induces channelling. The straight walls and sharper edges allow for holes to be placed all the way to the edge, which allows for maximum extraction consistency.

Compatible with Breville/Sage 54mm
The upper portion of the basket before the stepdown fits Breville/Sage 54mm portafilters and machines, just like other 54mm baskets. It should also work with most 54mm dosing rings, most 54mm puck/mesh screens, but will be most optimal with the INTROVERT 54-42mm Stepdown Dosing Ring and INTROVERT Puck screen for 54-42mm.

42mm Extraction Zone
Focuses flow through a 42mm diameter extraction zone, enhancing clarity and balance. My custom Self-Leveling Tampers from the Premium Accessories Bundle will fit either directly on the basket or on the custom Stepdown Dosing Ring.

Vertical Walls
The near perfectly vertical basket walls mean that there is negligible diameter change throughout the entire extraction zone, and therefore not forcing significant pressure changes the deeper down the basket it goes. Note that your tamper or puck/mesh screens may not fit at the very bottom of this basket. One difference in workflow you will find vs other stamped or tapered baskets is that the spent puck will be more stubborn to get out. It will need more knocks or harder knocks to get the puck out, or you can use the Silicone Espresso Puck Ejector to effortlessly pop it out from the bottom. 

Angled Step Down
The angled step down ensures that all coffee grounds will easily and satisfyingly fall down to the 42mm zone without getting stuck at the ledge when you tap it or wiggle it around. As a bonus, if your dose is lower than the maximum capacity, you sometimes may be able to do puck prep without using a dosing ring, as the grounds can all fall towards the center.

Maximum Hole Coverage For High Extraction
Precise laser-cut holes that are evenly spaced in a layout inspired by the Fibonacci sequence. The whole array stretches all the way to the absolute edges of the basket to promote maximum evenness and smoothness in flow because there's no change in diameter throughout the entire depth of the puck.

Hole Pattern
This basket has 601 holes x 0.3mm in size, which is the same hole density as the Standard flow of the 58-49mm V0.5 Beta baskets.


What's Included:

Every individual accessory is also available for purchase on its own, found on the Espresso Tools page.

Requirements (Not Included):

  • 54mm bottomless portafilter
    • The basket is taller than usual baskets, which means it will likely not fit on any portafilters with a closed bottom
  • Machine with 54mm grouphead

 

Compatibility:

  • Breville/Sage Barista Express, Pro, etc..
  • Breville/Sage Bambino models
  • Untested with other 54mm machines, but it should fit if your machine can work with baskets meant for Breville/Sage portafilters and machines

3D Printed Starter Bundle Files

I will be providing the 3D printable STL files for the starter bundle components for free if you'd like to print your own.

  • Designed By INTROVERT in Vancouver, Canada
  • Made in China

Materials

Dimensions

Care Instructions

View full details