Thank You!

I want to thank you again for purchasing my bellows and supporting my small business!

-Andrew

First Steps

Before first use, wash gently with hands with warm water with or without dish soap.

Upgrade Instructions

  1. Remove lid
  2. Install the long thick end of the bellows into the funnel of the LAGOM Mini
  3. Replace lid on the top of bellows

Using The Bellows

  • To clear retention most effectively, pump bellows after the beans are done grinding while the grinder is still running.
  • Gentle sharp taps on the bellows can expel more grounds than just pushing the bellows down. Release bellows slower to prevent suction.
  • You can experiment with pumping the bellows during grinding, which may have an effect on grind size and clumping
  • The lighter the roast and less oily the beans, the more likely you’ll be able to achieve zero retention.
  • The more consistent the grind size setting, the more likely you’ll be able to achieve zero retention.

Care Instructions

  • Periodically clean the grinder burrs as directed by manufacturer. There may be retention right after cleaning.
  • To clean, gently wash by hand with warm water. Dish soap is okay. Do not put in dishwasher. Do not use chemicals.
  • Keep bellows away from extreme heat (90+°C / 194+°F) or it may deform or degrade permanently.
  • Keep away from sharp objects. Do not puncture.
  • Do not pull apart.

Need More Information?

If there's something I haven't covered here, please feel free to contact me about it and I'll do my best to answer it.

Contact