Skip to product information
1 of 12

INTROVERT

Baratza Vario Single Dose Hopper & Bellows Combo

Regular price $52.00 USD
Regular price $52.00 USD Sale price $52.00 USD
Sale Sold out
Shipping calculated at checkout.
Configuration
Color
Model

If you only single dose on your Baratza Vario, you can swap out your large stock hopper for our 3D printed low-profile, single dose hopper designed specifically for the Baratza grinders models (except Sette). If you also have issues with retention, then say farewell to it with our optional bellows that will help you achieve up to an incredible 0.0g to 0.2g retention on each grind*.

 

[Design Features]

Our design philosophy revolves around simplicity and utmost effectiveness, both meticulously woven into the design of our Baratza single dose hopper and bellows.

  • The single dose hopper replaces the original stock hopper while maintaining its tapered aesthetics.
  • Low profile design allows an approximate 7cm (2-3/4in) of clearance compared to the original full-sized stock hopper, and is even shorter than Baratza's single dose hopper.
  • Simple installation, taking less than a minute and requiring no additional tools.
  • Maintains the same interaction for adjusting entire grind size.
  • Maintains the original range of grind size adjustment.
  • Built in anti-popcorn design reduces most popcorning (even better with bellows).
  • Fits and works with the stock gasket seal above the burrs
  • Approximately 40g capacity
  • Optionally combo with our silicone bellows (which also perfectly fits the Niche Zero and Duo) for up to 0.0g to 0.2g* retention.

 

[Compatibility]

  • Vario
  • Vario+
  • Vario W
  • Vario W+

It is also compatible with:

  • Forte AP
  • Forte BG
  • Encore
  • Encore ESP
  • Virtuoso
  • Virtuoso+
  • (Optional silicone bellows is 100% cross-compatible with Niche Zero and Duo and other Introvert single dose hoppers)

The 3D printing "seam line" of the hopper is oriented at the back of the hopper specifically in the listings for the Forte and Vario. Although it will also fit on the conical grinders like Encore and Virtuoso, they will be at the front.

[*Disclaimer]

  • The finest grind range may decrease bellows effectiveness due to restricted air flow. Adjust to a coarser range while pumping bellows and running grinder to fully clear retention.
  • Grinding after changing grind size may still cause some retention
  • Using darker roasts may cause more retention
  • RDT method not recommended
  • Achieve the best results with lighter roasted beans and at a consistent grind size setting.
  • Does not include the grinder nor the stock hoppers in the photos

Materials

PLA Hopper
Silicone Bellows

Dimensions

Care Instructions

Hopper:
• Keep hopper away from heat (40+°C / 104+°F) or it may deform permanently
• To clean hopper, wipe or rinse with cool to warm water
• Do not put in dishwasher

Bellows:
• Keep bellows away from heat (90+°C / 194+°F) or it may deform permanently
• To clean, wash gently by hand with warm water
• Do not put in dishwasher

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
t
telej
Better hopper and nice bellows

I have a Vario W+(purchased 2024), grinding medium roast for pour over. The hopper feeds all beans and no beans popcorn out of the hopper(20g dose). When using the stock hopper for single dose, a few beans would always hang up on the bottom lip of the hopper. I would then have to brush them down, while grinding.

The bellows is a perfect fit and clears the grinder with two or three puffs. I was retaining .5 to 1.0 grams before using the bellows. I think the item description of 0 to 0.2 grams of retention using the bellows is accurate.

Referencing the photos on the website item page. My hopper is different, having the printing seam lining up with the index mark/narrow lug. Index mark aligns with where the shutoff knob/lever is on the stock hopper. The photo with the hopper filled with beans on a scale is weird. On a Vario, just plan on leaving the hopper installed.

S
Steve
Works fine, bellows could be a better

Fits fine, much smaller than the stock one obviously. Find that the Bellow doesn't push much air into the grinder as it doesn't form a decent enough seal. Would have probably created a bellow that fits somewhat tightly around the entire hopper versus sitting inside it?

J
Jeff

I like it. It's shorter than the stock hopper (and Baratzas own single dose hopper), so it fits much better under my kitchen cabinets.
There's a gasket to mate the bottom of the hopper with the top burr carrier more tightly, which I guess is to ensure the airflow from the bellows goes the right way, but should also keep the internals of the grinder more free of stray coffee particles.
The "popper-stopper" is much better designed and more effective than the stock one too.